Publications

  • Journal Papers

Selected peer-reviewed journal papers 

S. Zhan, Y. Zhao∗, Intentionally-induced dynamic gas film enhances the precision of electrochemical micromachiningJournal of Materials Processing Tech., Volume 291, Pages 117049 (2021)

Z. Chen, S. Zhan, Y. Zhao∗Electrochemical jet-assisted precision grinding of single-crystal SiC using soft abrasive wheelInternational Journal of Mechanical Sciences, Volume 195, Pages 106239 (2021)

S. Zhan, Y. Zhao*Plasma-assisted electrochemical machining of microtools and microstructuresInternational Journal of Machine Tools and Manufacture, Volume 156, Pages 1-15, 103596, 10.1016/j.ijmachtools.2020.103596 (2020)

Y. Zhao*, C. Zhao, S. Wang, S. Kakudo, M. Kunieda, Selective and localized embrittlement of metal by cathodic hydrogenation utilizing electrochemical jetPrecision Engineering, Volume 65, Pages 259–268 (2020).

S. Zhan, Y. Zhao*Suppression of cathode tool wear by a forward-bias voltage in pulsed spark-assisted chemical engravingElectrochemistry Communications, Volume 111, 106643 (2019).

Z. Chen, Y. Zhao*, Investigation into electrochemical oxidation behavior of 4H-SiC with varying anodizing conditionsElectrochemistry Communications, Volume 109, Pages 106608 (2019).

Y. Zhao*, M.Kunieda, Investigation on electrolyte jet machining of three-dimensional freeform surfacesPrecision Engineering, Volume 60, Pages 42-53 (2019). 

Joining SUSTech...

Y. Zhao*, M. Kunieda, K. Abe, A novel technique for slicing SiC ingots by EDM utilizing a running ultra-thin foil tool electrodePrecision Engineering, Volume 52, Pages 84–93 (2018).

O. Flaño, I. Ayesta, B. Izequierdo, J. A. Sanchez, Y. Zhao, M. Kunieda, Improvement of EDM performance in high-aspect ratio slot machining using multi-holed electrodsPrecision Engineering, Volume 51, Pages 223-231 (2018).

Y. Zhao*, M. Kunieda, N. Obi, S. Watanabe, Development of electrolyte filtration system for ECM taking into account removal of chromium (VI) ionsPrecision Engineering, Volume 49, Pages 211–219 (2017).

O. Flaño, Y. Zhao*, M. Kunieda, K. Abe, Approaches for improvement of EDM cutting performance of SiC with foil electrodePrecision Engineering, Volume 49, Pages 33–40 (2017).

Y. Zhao*, M. Kunieda, K. Abe, EDM mechanism of single crystal SiC with respect to thermal, mechanical and chemical aspectsJournal of Materials Processing Technology, Volume 236, Pages 138–147 (2016).

Y. Zhao*, M. Kunieda, K. Abe, Comparison study of foil EDM characteristics of single crystal SiC between in deionized water and in EDM-oilInternational Journal of Advanced Manufacturing Technology, Volume 86, Issue 9, Pages 2905–2912 (2016).

Y. Zhao*, M. Kunieda, K. Abe, Challenge to EDM Slicing of Single Crystal SiC with Blade Electrode Utilizing a Reciprocating WorktableProcedia CIRP, Volume 42, Pages 185-190 (2016).

Y. Zhao*, M. Kunieda, K. Abe, Multi-discharge EDM coring of single crystal SiC ingot by electrostatic induction feeding methodPrecision Engineering, Volume 41, Pages 24–31 (2015).

Y. Zhao*, M. Kunieda, K. Abe, Study of EDM cutting of single crystal silicon carbidePrecision Engineering, Volume 38(1), Pages 92–99 (2014).

Y. Zhao*, M. Kunieda, K. Abe, Experimental Investigations into EDM Behaviors of Single Crystal Silicon CarbideProcedia CIRP, Volume 6, Pages 135–139 (2013).


International conference papers

Zhang, Y. Zhao*, M. Kunieda, Generation of 3D Freeform Surfaces by Electrolyte Jet Machining, The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology, 2019, Matsue, Japan.

Chen, Y. Zhao*, A comprehensive study on electrochemical oxidation of SiC single crystal, The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology, 2019, Matsue, Japan.

赵永华基于极薄多孔结构箔片电极的高效精密放电切割方法的基础研究与应用,第一届全国特种加工青年学者论坛,邀请报告,2018,南京航空航天大学

Lyu, F. Kimura, Y. Zhao, M. Kunieda, Y. Kajihara, Metal-polymer Injection Molding Direct Joining Using Electrolyte Jet Machining, The 7th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2017, Seoul, Korea.

Y. Zhao, M. Kunieda, Influences of jet posture and workpiece geometry on performances of electrolyte jet machining, The 7th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2017, Seoul, Korea.

Y. Zhao, M. Kunieda, Foil electrical discharge slicing system for wafering single crystal silicon carbide ingot, Tsinghua University – The University of Tokyo Joint Symposium on multidiscipline, Beijing, April 2017, p. 76.

Garg, F. Chu, Y. Zhao, M. Kunieda, The simulation of electrochemical machining process, The 17th International Machine Tool Engineers’ Conference (The 17th IMEC), Tokyo Big Sight, Nov. 2016, pp. 140.

Y. Zhao*, M. Kunieda, N. Obi, S. Watanabe, On removal of chromium from used electrolyte in ECM process, The 16th International Conference on Precision Engineering (ICPE), Nov. 2016, Hamamatsu, Shizuoka, Japan.

Y. Zhao*, M. Kunieda, K. Abe, Heat Conduction Analysis of EDM of Single Crystal SiC Taking into Account Joule Heating Effect, The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), August 2015, Harbin, China.

Y. Zhao*, M. Kunieda, K. Abe, Study on foil EDM of SiC single crystal in different dielectric fluids, The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), Nov. 2013, Taipei, Taiwan.

趙永華,国枝正典,静電誘導給電法と複数枚の箔電極を用いたマルチ放電スライシング,日本精密工学会春季学術講演会 (2018), 精密工学会学術講演会講演論文集 R07, pp. 939-940 (2018).

趙永華,国枝正典,スリットノズルを使用した電解液ジェットによる曲面加工,電気加工学会全国大会(2017),電気加工学会全国大会講演論文集 (2017).

Lyu, F. Kimura, Y. Zhao, M. Kunieda, Y. Kajihara, Current density dependence on joining strength in EJM based metal-polymer direct joining, 日本精密工学会秋季大会学術講演会講演論文集 (2017).

趙永華,国枝正典,電解液ジェット加工による任意曲面への電解加工,日本精密工学会春季学術講演会 (2017), 精密工学会学術講演会講演論文集 I46, pp. 687-688 (2017).

趙永華,国枝正典,小尾伸昭,渡邊俊次郎,電解加工における電解液処理に関する研究,日本電気加工学会全国大会(2016), 電気加工学会全国大会講演論文集, pp 61-64 (2016).

Flaño, Y. Zhao*, M. Kunieda, K. Abe, Improvement on machining performance in EDM slicing by specifically designed thin foil electrode, 2016日本精密工学会秋季大会学術講演会講演論文集, 171-172 (2016).

趙永華,国枝正典,阿部耕三,極薄箔電極を用いた単結晶SiC の放電スライシング加工に関する研究,精密工学会秋季学術講演会 (2015), 日本精密工学会学術講演会講演論文集 A16, pp. 19-20 (2015).

趙永華,国枝正典,阿部耕三,静電誘導給電を用いた並列放電によるSiCインゴットのくり抜き放電加工に関する研究,日本精密工学会春季学術講演会 (2015), 精密工学会学術講演会講演論文集 B02, pp. 41-42 (2015).

Y. Zhao, M. Kunieda, K. Abe, T. Harada, Improvement of foil EDM slicing of SiC single crystal by utilizing reciprocating worktable, 日本電気加工学会全国大会(2013), 電気加工学会全国大会講演論文集, pp. 75-78 (2013).

Y. Zhao, M. Kunieda, K. Abe, T. Harada, Investigation of foil EDM slicing performances of single crystal SiC, 日本精密工学会秋季学術講演会 (2013), 精密工学会学術講演会講演論文集 Q32, pp. 967-968 (2013).

Y. Zhao, M. Kunieda, K. Abe, Experimental Studies of EDM Slicing of Single Crystal SiC Ingots by Band Copper Foil Electrodes, 日本電気加工学会全国大会 (2012) 、電気加工学会全国大会講演論文集, pp. 81-82 (2012).

Y. Zhao, M. Kunieda, K. Abe, Fundamental Studies of EDM Characteristics of Single Crystal Silicon Carbide, 日本精密工学会秋季学術講演会 (2012), 精密工学会学術講演会講演論文集 E43, pp. 359-360 (2012).

Copyright © 2018 All Rights Reserved.