Publications

  • Journal Papers

2019

[1] He W, Perez JM, Yu P, Li KBL, Non-modal stability analysis of low-Re separated flow around a NACA 4415 airfoil in ground effect, Aerospace Science and Technology (Accepted).

[2] Xu X, Yu P, Extension of SPH to simulate non-isothermal free surface flows during the injection molding process, Applied Mathematical Modelling, 73, 715-731, 2019.

[3] Chamoli S, Lu R, Chen H, Cheng Y, Yu P, Numerical optimization of design parameters for a modified double-layer microchannel heat sink, International Journal of Heat and Mass Transfer, 138, 373-389, 2019.

[4] Tang T, Yu P, Shan X, Chen H, The formation mechanism of recirculating wake for steady flow through and around arrays of cylinders, Physics of Fluid, 31, 043607, 2019. (Editor’s Pick)

[5] Tang T, Yu P, Shan X, Chen H, Su J, Investigation of drag properties for flow through and around square arrays of cylinders at low Reynolds numbers, Chemical Engineering Science, 199, 285-301, 2019.

[6] Chamoli S, Tang T, Yu P, Lu R, Effect of shape modification on heat transfer and drag for fluid flow past a cam-shaped cylinder, International Journal of Heat and Mass Transfer, 131, 1147-1163, 2019.

2018

[7] Yu S, Yu P, Tang T, Effect of thermal buoyancy on flow and heat transfer around a permeable circular cylinder with internal heat generation, International Journal of Heat and Mass Transfer, Part B, 126, 1143-1163, 2018.

[8] Yu P, Lu R, He W, Li KBL, Steady flow around an inclined torus at low Reynolds numbers: Lift and drag coefficients, Computers & Fluids, 171, 53-64, 2018.

[9] Xu X, Yu P, A technique to remove the tensile instability in weakly compressible SPH, Computational Mechanics, 62, 963-990, 2018.

[10] Chamoli S, Lu R, Xie J, Yu P, Numerical study on flow structure and heat transfer in a circular tube integrated with novel anchor shaped inserts, Applied Thermal Engineering, 135, 304-324, 2018.

[11] Chamoli S, Lu R, Xu D, Yu P, Thermal performance improvement of a solar air heater fitted with winglet vortex generators, Solar Energy, 159, 966-983, 2018.

[12] He W, Yu P, Li KB, Ground effects on the stability of separated flow around a NACA 4415 airfoil at low Reynolds numbers, Aerospace Science and Technology, 72, 63-76, 2018.

2017 

[13] Chamoli S, Yu P, Lu R, Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts, Applied Thermal Engineering, 121, 1117-1134, 2017.

[14] Xu X, Yu P, Modeling and simulation of injection molding process of polymer melt by a robust SPH method, Applied Mathematical Modelling, 48, 384-409, 2017.

[15] Myo KS, Zhou W, Huang X, Yu P, Back heating effect of media hot spot at nanoscale head-disk interface, Microsystem Technologies, 23, 2587–2597, 2017.

[16] Chamoli S, Yu P, Yu S, Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts, Applied Thermal Engineering, 117, 708-724, 2017.

[17] Yu P, Zeng Y, Characterization of laser-induced local heating in a substrate, International Journal of Heat and Mass Transfer, 106, 989-996, 2017.

2016

[18] Chamoli S, Yu P, Kumar A, Multi-response optimization of geometric and flow parameters in a heat exchanger tube with perforated disk inserts by Taguchi grey relational analysis, Applied Thermal Engineering, 103, 1339-1350, 2016.

[19] Xu X, Yu P, A multiscale SPH method for simulating transient viscoelastic flows using bead-spring chain model, Journal of Non-Newtonian Fluid Mechanics, 229, 27-42, 2016.

2015

[20] Yu P, Yu S, Zhou W, Evaluation of thermal performance of graphene overcoat on multi-layered structure subject to laser heating, International Communication in Heat and Mass Transfer, 68, 27-31, 2015.

[21] Yu P, Patterson JC and Lei C, A scaling analysis of transient natural convection in a reservoir model induced by iso-flux heating, Journal of Fluid Mechanics, 764, 219-249, 2015.

[22] Yu P, Zhou W and Yu S, Effect of the thickness of diamond-like carbon layer on local temperature increase on multi-layered structure induced by laser heating, Numerical Heat Transfer, Part A: Applications, 67, 791-807, 2015.

2014

[23] Yu P, Steady flow past a torus with aspect ratio less than 5, Journal of Fluids and Structures, 48, 393-406, 2014.

[24] Xu F, Yang Q, and Yu P, Numerical studies of transition from steady to unsteady coupled thermal boundary layers, International Journal of Computational Method, 11, 1344002, 2014.

[25] Bai HX, Yu P, Zeng Y, Winoto SH, and Low HT, Mass transport for mixed coculture applications in a perfusion bioreactor partially filled with a porous layer, Journal of Porous Media, 17, 17-30, 2014.

2013

[26] Yu P, Zhou W, Yu S, and Myo KS, Modeling laser heated thin film media for heat assisted magnetic recording, Microsystem Technologies, 19, 1457-1463, 2013.

[27] Yu P, Zhou W, Yu S, and Liu B, Thermal effect of a thin overcoating layer subject to laser heating, IEEE Transactions on Magnetics, 49, 2782-2785, 2013.

[28] Zeng M, Yu P, Xu F, and Wang QW, Natural convection in triangular attics filled with porous medium heated from below, Numerical Heat Transfer Part A - Application, 63, 735-754, 2013.

[29] Yu P, Zhou W, Yu S, and Zeng Y, Laser-induced local heating and lubricant depletion in heat assisted magnetic recording systems, International Journal of Heat and Mass Transfer 59, 36-45, 2013.

2012

[30]  Yu P, Patterson JC and Lei C, A numerical simulation of transient near-shore natural convection induced by ramped iso-flux cooling, International Journal of Heat and Fluid Flow 38, 107-117, 2012.

[31] Yu P, Zeng Y, Lee TS, Chen XB and Low HT, Numerical simulation on steady flow around and through a porous sphere, International Journal of Heat and Fluid Flow 36, 142-152, 2012.

[32] Yu P, Patterson JC and Lei C, Transient behaviour of natural convection in a reservoir model induced by surface heating, JSME Journal of Thermal Science and Technology 7, 211-226, 2012.

[33] Yu P, Numerical simulation on oxygen transfer in a porous scaffold for animal cell culture, International Journal of Heat and Mass Transfer 55, 4043-4052, 2012.

2011

[34] Yu P, Yeo KS, Dhanabalan S and Ang SJ, A three-dimensional hybrid meshfree-Cartesian scheme for fluid-body interaction, International Journal for Numerical Methods in Engineering 88, 385-408, 2011.

[35] Yu P, Zeng Y, Lee TS, Chen XB and Low HT, Steady flow around and through a permeable circular cylinder, Computers & Fluids 42, 1-12, 2011.

2010

[36] Chen XB, Sui Y, Cheng YP, Lee HP, Yu P, Winoto SH and Low HT, Mass transport in a microchannel enzyme reactor with a porous wall: hydrodynamic modeling and applications, Biochemical Engineering Journal 52, 227-235, 2010.

[37] Chen XB, Sui Y, Lee HP, Bai HX, Yu P, Winoto SH and Low HT, Mass transport in a microchannel bioreactor with a porous wall, ASME Journal of Biomechanical Engineering 132(6): 061001, 2010.

[38] Yu P, Zeng Y, Lee TS, Bai HX and Low HT, Wake structure for flow past and through a porous square cylinder, International Journal of Heat and Fluid Flow 31, 141-153, 2010.

[39] Wang XY, Yu P, Yeo KS and Khoo BC, SVD-GFD scheme to simulate complex moving body problems in 3D space, Journal of Computational Physics 229, 2314-2338, 2010.

2009

[40] Bai HX, Yu P, Winoto SH and Low HT, Boundary conditions at the interface between fluid layer and fibrous medium, International Journal for Numerical Methods in Fluids 60, 809-825, 2009.

[41] Bai HX, Yu P, Winoto SH and Low HT, Lattice Boltzmann method for flows in porous and homogenous fluid domains coupled at the interface by stress jump, International Journal for Numerical Methods in Fluids 60, 691-708, 2009.

[42] Yu P, Lee TS, Zeng Y, Meguid SA and Low HT, A numerical technique for laminar swirling flow at the interface between porous and homogenous fluid domains, International Journal for Numerical Methods in Fluids 60, 337-353, 2009.

[43] Chen XB, Yu P, Sui Y, Winoto SH and Low HT, Natural convection in a cavity filled with porous layers on the top and bottom walls, Transport in Porous Media 78, 259-276, 2009.

[44] Yu P, Zeng Y, Lee TS and Low HT, A numerical analysis of cell density effect on oxygen transport in a micro-bioreactor with a tissue engineering scaffold, International Communications in Heat and Mass Transfer 36, 569-573, 2009.

[45] Chen XB, Yu P, Winoto SH and Low HT, Numerical analysis for the flow past a porous trapezoidal-cylinder based on the stress-jump interfacial-conditions, International Journal of Numerical Methods for Heat & Fluid Flow 19, 223-241, 2009.

[46] Yu P and Meguid SA, Effects of wavy sidewall on vortex breakdown in an enclosed cylindrical chamber with a rotating end wall, Physics of Fluids 21, 017104, 2009.

[47] Yu P, Lee TS, Zeng Y and Low HT, Fluid dynamics and oxygen transport in a micro-bioreactor with a tissue engineering scaffold, International Journal of Heat and Mass Transfer 52, 316-327, 2009.

2008

[48] Yu P, Lee TS, Zeng Y and Low HT, Vortex breakdown in an enclosed cylinder with a partially rotating bottom-wall, ASME Journal of Fluids Engineering 130, 111101, 2008.

[49] Yu P, Lee TS, Zeng Y and Low HT, A numerical analysis of effects of vortex breakdown on oxygen transport in a microbioreactor, International Communication in Heat and Mass Transfer 35, 1141-1146, 2008.

[50] Yu P, Zeng Y, Lee TS and Low HT, Steady axisymmetric flow in an enclosed conical frustum chamber with a rotating bottom wall, Physics of Fluids 20, 087103, 2008.

[51] Chen XB, Yu P, Winoto SH and Low HT, Numerical analysis for the flow past a porous square cylinder based on the stress-jump interfacial-conditions, International Journal of Numerical Methods for Heat & Fluid Flow 18, 635-655, 2008.

[52] Zeng Y, Lee TS, Yu P and Low HT, Numerical simulation of mass transport in a microchannel bioreactor with cell micropatterning, ASME Journal of Biomechanical Engineering 130, 031018, 2008.

[53] Chen XB, Yu P, Winoto SH and Low HT, A numerical method for forced convection in porous and homogenous fluid domains coupled at interface by stress jump, International Journal for Numerical Methods in Fluids 56, 1705-1729, 2008.

[54] Chen XB, Yu P, Winoto SH and Low HT, Forced convection over a backward facing step with a porous floor segment, Numerical Heat Transfer, Part A: Applications 53, 1211-1230, 2008.

2007

[55] Chen XB, Yu P, Winoto SH and Low HT, Free convection in a porous wavy cavity based on the Darcy-Brinkman-Forchheimer extended model, Numerical Heat Transfer, Part A: Applications 52, 377-397, 2007.

[56] Zeng Y, Lee TS, Yu P and Low HT, Mass transport in a microchannel bioreactor for co-culture applications, ASME Journal of Biomechanical Engineering 129, 365-373, 2007.

[57] Yu P, Lee TS, Zeng Y and Low HT, Characterization of flow behavior in an enclosed cylinder with a partially rotating end wall, Physics of Fluids 19, 057104, 2007.

[58] Zeng Y, Lee TS, Yu P and Low HT, Numerical study on the influence of surface roughness on fluid flow and mass transfer in a flat-plate microchannel bioreactor, International Journal of Modern Physics C 18, 131-155, 2007.

[59] Yu P, Lee TS, Zeng Y and Low HT, A numerical method for flows in porous and homogenous fluid domains coupled at the interface by stress jump, International Journal for Numerical Methods in Fluids 53, 1755-1775, 2007.

[60] Zeng Y, Lee TS, Yu P and Low HT, Numerical study of mass transfer coefficient in a 3D flat-plate rectangular microchannel bioreactor, International Communication in Heat and Mass Transfer 34, 217-224, 2007.

[61] Yu P, Lee TS, Zeng Y and Low HT, A 3D analysis of oxygen transfer in a low-cost micro-bioreactor for animal cell suspension culture, Computer Methods and Programs in Biomedicine 85, 59-68, 2007.

2006

[62] Yu P, Lee TS, Zeng Y and Low HT, Effects of conical lids on vortex breakdown in an enclosed cylindrical chamber, Physics of Fluids 18, 117101, 2006.

[63] Zeng Y, Lee TS, Yu P, Roy P and Low HT, Mass transport and shear stress in a microchannel bioreactor: numerical simulation and dynamic similarity, ASME Journal of Biomechanical Engineering 128, 185-193, 2006.

2005

[64] Yu P, Lee TS, Zeng Y and Low HT, Effect of vortex breakdown on mass transfer in a cell culture bioreactor, Modern Physics Letters B 19, 1543-1546, 2005.

[65] Zeng Y, Lee, TS, Yu P and Low HT, Effect of surface roughness on mass transfer in a flat-plate microchannel bioreactor, Modern Physics Letters B 19, 1559-1562, 2005.

Copyright © 2018 All Rights Reserved.