[1] Chen, Z.-R.; Kornfield, J. A.; Smith, S. D.; Grothaus, J. T.; Satkowski, M. M., Pathways to macroscale order in nanostructured block copolymers. Science 1997, 277 (5330), 1248-1253.
[2] Chen, Z.-R.; Claverie, J. P.; Grubbs, R. H.; Kornfield, J. A., Modeling ring-chain equilibria in ring-opening polymerization of cycloolefins. Macromolecules 1995, 28 (7), 2147-2154.
[3] Miller, S. J.; Kim, S.-H.; Chen, Z.-R.; Grubbs, R. H., Catalytic ring-closing metathesis of dienes: application to the synthesis of eight-membered rings. Journal of the American Chemical Society 1995, 117 (7), 2108-2109.
[4] Chen, Z.-R.; Issaian, A.; Kornfield, J.; Smith, S.; Grothaus, J.; Satkowski, M., Dynamics of shear-induced alignment of a lamellar diblock: a rheo-optical, electron microscopy, and X-ray scattering study. Macromolecules 1997, 30 (23), 7096-7114.
[5] Chen, Z.-R.; Kornfield, J. A., Flow-induced alignment of lamellar block copolymer melts. Polymer 1998, 39 (19), 4679-4699.
[6] Gupta, V.; Krishnamoorti, R.; Chen, Z.-R.; Kornfield, J.; Smith, S.; Satkowski, M.; Grothaus, J., Dynamics of shear alignment in a lamellar diblock copolymer: interplay of frequency, strain amplitude, and temperature. Macromolecules 1996, 29 (3), 875-884.
[7] Wiyatno, W.; Chen, Z.-R.; Liu, Y.; Waymouth, R. M.; Krukonis, V.; Brennan, K., Heterogeneous composition and microstructure of elastomeric polypropylene from a sterically hindered 2-arylindenylhafnium catalyst. Macromolecules 2004, 37 (3), 701-708.
[8] Wiyatno, W.; Fuller, G. G.; Pople, J. A.; Gast, A. P.; Chen, Z.-R.; Waymouth, R. M.; Myers, C. L., Component stress-strain behavior and small-angle neutron scattering investigation of stereoblock elastomeric polypropylene. Macromolecules 2003, 36 (4), 1178-1187.
[9] Lu, L.; Wang, W.; Cai, W.; Chen, Z.-R., Synthesis and Characterization of SiO2@poly (4-vinylpyridine)@ Polypyrrole-Palladium Composites. Journal of Polymer Materials 2012, 29 (2), 253.
[10] Lu, L.; Wang, W.; Cai, W.; Chen, Z.-R., Synthesis and characterization of polypyrrole-Au coated SiO2@ poly (4-vinylpyridine) composites. Journal of Applied Polymer Science 2013, 128 (6), 4130-4135.
[11] Sun, W.; Zhou, Y.; Chen, Z.-R., Fabrication of honeycomb-structured porous film from polystyrene via polymeric particle-assisted breath figures method. Macromolecular Research 2013, 21 (4), 414-418.
[12] Wang, W.; Lu, L.; Cai, W.; Chen, Z.-R., Synthesis and characterization of coaxial silver/silica/polypyrrole nanocables. Journal of Applied Polymer Science 2013, 129 (5), 2377-2382.
[13] Li, W.; Guan, C.; Xu, J.; Chen, Z.-R.; Jiang, B.; Wang, J.; Yang, Y., Bimodal/broad polyethylene prepared in a disentangled state. Industrial & Engineering Chemistry Research 2014, 53 (3), 1088-1096.
[14] Weng, G.-S.; Bao, J.-B.; Xu, Y.-C.; Chen, Z.-R., New insight into stretch induced structural evolution of α trans-1, 4-polyisoprene characterized by real time synchrotron WAXS and SAXS measurements. Journal of Polymer Research 2013, 20 (3), 1-8.
[15] Li, W.; Hou, L.; Chen, Z.-R., An NMR Investigation of Phase Structure and Chain Dynamics in the Polyethylene/Montmorillonite Nanocomposites. Journal of Nanomaterials 2013, 2013, 937201.
[16] Sun, W.; Zhou, Y.; Ju, Y.; Yang, L.; Xu, T.; Chen, Z.-R., A study of morphology modulation of honeycomb hybrid films and the interfacial behavior of silica particles within a patterned polymeric matrix. Macromolecular Chemistry and Physics 2014, 215 (1), 96-102.
[17] Li, W.; Guan, C.; Xu, J.; Mu, J.; Gong, D.; Chen, Z.-R.; Zhou, Q., Disentangled UHMWPE/POSS nanocomposites prepared by ethylene in situ polymerization. Polymer 2014, 55 (7), 1792-1798.
[18] Guan, C.; Yang, H.; Li, W.; Zhou, D.; Xu, J.; Chen, Z.-R., Crystallization behavior of ultrahigh-molecular-weight polyethylene/polyhedral oligomeric silsesquioxane nanocomposites prepared by ethylene in situ polymerization. Journal of Applied Polymer Science 2014, 131 (19), 40847.
[19] Ren, G.; Wang, W.; Yang, Y.; Cai, W.; Chen, Z.-R., Coating Polypyrrole-Silver Nanocomposites on Sulfonated-Polystyrene Microspheres by One-Step Method Using AgNO3 as an Oxidant. Journal of Polymer Materials 2014, 31 (2), 135.
[20] Mu, J.; Yang, F.; Li, W.; Gong, D.; Liu, Z.; Jiang, F.; Chen, Z.-R., Synthesis of amphiphilic linear-hyperbranched graft-copolymers via grafting based on linear polyethylene backbone. Journal of Polymer Science Part A: Polymer Chemistry 2014, 52 (15), 2146-2154.
[21] Weng, G.; Yao, H.; Chang, A.; Fu, K.; Liu, Y.; Chen, Z.-R., Crack growth mechanism of natural rubber under fatigue loading studied by a real-time crack tip morphology monitoring method. RSC Advances 2014, 4 (83), 43942-43950.
[22] Gong, D.; Liu, W.; Chen, T.; Chen, Z.-R.; Huang, K.-W., Ethylene polymerization by PN 3-type pincer chromium (III) complexes. Journal of Molecular Catalysis A: Chemical 2014, 395, 100-107.
[23] Bao, J.-B.; Weng, G.-S.; Zhao, L.; Liu, Z.-F.; Chen, Z.-R., Tensile and impact behavior of polystyrene microcellular foams with bi-modal cell morphology. Journal of Cellular Plastics 2014, 50 (4), 381-393.
[24] Weng, G.-S.; Wu, J.-R.; Xu, Y.-C.; Bao, J.-B.; Huang, G.; Chen, Z.-R., Study on the stretch induced phase transition of α trans-1, 4-polyisoprene by in-situ SAXS and WAXS measurements. Journal of Polymer Research 2014, 21 (11), 1-8.
[25] Yang, Y.; Wang, W.; Chen, T.; Chen, Z.-R., Simultaneous Synthesis and Assembly of Silver Nanoparticles to Three-Demensional Superstructures for Sensitive Surface-Enhanced Raman Spectroscopy Detection. ACS applied materials & interfaces 2014, 6 (23), 21468-21473.
[26] Li, W.; Chen, T.; Guan, C.; Gong, D.; Mu, J.; Chen, Z.-R.; Zhou, Q., Influence of polyhedral oligomeric silsesquioxane structure on the disentangled state of ultrahigh molecular weight polyethylene nanocomposites during ethylene in situ polymerization. Industrial & Engineering Chemistry Research 2015, 54 (5), 1478-1486.
[27] Song, S.; Miao, W.; Wang, Z.; Gong, D.; Chen, Z.-R., Synthesis and characterization of precisely-defined ethylene-co-aryl ether polymers via ADMET polymerization. Polymer 2015, 64, 76-83.
[28] Yao, H.; Weng, G.; Liu, Y.; Fu, K.; Chang, A.; Chen, Z.-R., Effect of silane coupling agent on the fatigue crack propagation of silica-filled natural rubber. Journal of Applied Polymer Science 2015, 132 (20), 41980.
[29] Huang, J.; Wang, S.; Sun, W.; Zhang, Z.; Cheng, C.; Ju, Y.; Yang, P.; Ding, L.; Chen, Z.-R., Research on Hydrophobic and Superhydrophobic Properties of Patterned Structure with Controllable Nano to Microstructural Hierarchy. Macromolecular Chemistry and Physics 2015, 216 (23), 2279-2286.
[30] Yang, P.; Huang, J.; Sun, W.; Wei, Y.; Liu, Y.; Ding, L.; Bao, J.; Chen, Z.-R., Exploration of selective decoration of Janus silica particles within polymeric patterned pore arrays. RSC Advances 2016, 6, 55860-55866.
[31] Yang, Y.; Yu, F.; Huang, L.; Chen, Z.-R., A facile approach to control metal superstructure architecture with organic thin films. RSC Advances 2016, 6 (9), 7409-7412.
[32] Weng, G.; Chang, A.; Fu, K.; Kang, J.; Ding, Y.; Chen, Z.-R., Crack growth mechanism of styrene-butadiene rubber filled with silica nanoparticles studied by small angle X-ray scattering. RSC Advances 2016, 6 (10), 8406-8415.
[33] Miao, W.; Lv, Y.; Zheng, W.; Wang, Z.; Chen, Z.-R., Epitaxial crystallization of precisely fluorine substituted polyethylene induced by carbon nanotube and reduced graphene oxide. Polymer 2016, 83, 205-213.
[34] Miao, W.; Wang, Z.; Li, Z.; Wang, B.; Zheng, W.; Chen, Z.-R., Epitaxial crystallization of precisely chlorine-substituted polyethylene induced by carbon nanotube and graphene. Polymer 2016, 94, 53-61.
[35] Jiang, B.; Zhu, L.; Zhao, C.; Chen, Z.-R., An investigation on the bound rubber and dynamic mechanical properties of polystyrene particles-filled elastomer. Polymer Composites 2017, 38(6), 1112-1117.
[36] Li, W.; Li, R.; Li, C.; Chen, Z.-R.; Zhang, L., Mechanical properties of surface-modified ultra-high molecular weight polyethylene fiber reinforced natural rubber composites. Polymer Composites 2017, 38(6), 1215-1220.
[37] Wang S, Chen Z R. Fluorescence lifetime-based sensing of polymersome leakage. Photochem Photobiol Sci, 2017, 16(2):155-158.
[38] Zhou Y, Huang J, Sun W, Chen, Z.-R. et al. Fabrication of Active Surfaces with Metastable Microgel Layers Formed during Breath Figure Templating.. Acs Applied Materials & Interfaces, 2017, 9(4):4177.
[39] Ding, Y., Cao, X., Weng, G., Yin, Q., Wang, L., Chen, Z.-R.Crack growth behavior of natural rubber influenced by functionalized carbon nanotubes. Journal of Applied Polymer Science, 2017, 134(9):44527.
[40] F, Yu，Y, Yang，D, He，D, Gong，Chen, Z.-R., Pressure-Sensitive Supported FI Catalyst for the Precise Synthesis of Uni- and Bimodal Polyethylene. Ind. Eng. Chem. Res, 2017, 56(16):4684–4689.
[41] Chen Y , Ye Y , Chen, Z.-R. Vapor-based synthesis of bilayer anti-corrosion polymer coatings with excellent barrier property and superhydrophobicity. Journal of Materials Science, 2019, 54(7): 5907–5917.

[1] Zhong-Ren Chen, Mccauley Kevin, Mark, W. Smale, Michael W. Hayes, Steven Luo, United States Patent 9,303,154: Rubber compositions including a polymeric component having a multi-modal molecular weight distribution
[2] Mark W. Smale, Zhong-Ren Chen, United States Patent 9,006,310: Intermeshing Mixing of Filler and Polymer Solution Masterbatch
[3] William L. Hergenrother, Walter Tomaszewski, Ashley Hilton, Michael Hayes, James H. Pawlow, Terrence E. Hogan, Zhong-Ren Chen, United States Patent 8642691: Amino Alkoxy-modified Silsesquioxane Adhesives for Improved Metal Adhesion and Metal Retention to Cured Rubber
[4] Zhong-Ren Chen, Steven Luo, United States Patent, 8,592,509: Rubber composition having improved crack resistance
[5] Zhong-Ren Chen, Joseph M. Lanzarotta, Yuichi Nagai, Tomohiro Kusano, United States Patent, 8,450,409: Method for mixing a rubber composition
[6] Zhong-Ren Chen, Zengquan Qin, Hiroshi Mouri, Yuan-yong Yan, Mindaugas Rackaitis, United States Patent, 8,158,700: Method of improving affinity between filler and polymers having a low degree of unsaturation
[7] Christine Rademacher, Steven Luo, Zhong-Ren Chen, Walter Tomaszewski, Edward Kelley, 8,067,503: Process for Producing Blends of Syndiotactic, 1,2-Polybutadiene and Rubbery Elastomers
[8] Steven Luo, Timothy L. Tartamella, Mark W. Smale, Kevin M. McCauley, Zhong-Ren Chen, United States Patent 7,879,958: Polyhydroxy Compounds as Polymerization Quenching Agents
[9] Zhong-Ren Chen, Sanjeev D. Naik, William M. Cole, Georg G. A. Böhm, United States Patent 7,790,798: Solution Masterbatch Process Using Finely Ground Fillers for Low Hysteresis Rubber
[10] Zhong-Ren Chen, Sunji Araki, William M. Cole, William Hergenrother, Sandra Warren, United States Patent 7,312,271: Solution Masterbatch Process Using Fine Particle Silica for Low Hysteresis Rubber
[11] Zhong-Ren Chen and Christine Rademacher, United States Patent 7,091,282: Composition Containing Ethylene/Propylene/Diene Copolymer and Polyalkylene/Olefin Copolymer
[12] William L. Hergenrother, Walter Tomaszewski, Ashley S. Hilton, Michael W. Hayes, James H. Pawlow, Terrence E. Hogan, Zhong-Ren Chen, EP2373754A1: Amino alkoxy-modified silsesquioxane adhesives for improved metal adhesion and metal adhesion retention to cured rubber
[13] Zhong-Ren Chen, Mccauley Kevin, Mark, W. Smale, Michael W. Hayes, Steven Luo, EP 2370512A1: Rubber compositions including a polymeric component having a multi-modal molecular weight distribution
[14] Steven Luo, Timothy L. Tartamella, Mark W. Smale, Kevin M. McCauley, Zhong-Ren Chen, JP2014012844A: Continuous Polymerization Method for Producing Polymer, and Method for Producing Polymer
[15] Steven Luo, Timothy L. Tartamella, Mark W. Smale, Kevin M. McCauley, Zhong-Ren Chen, JP2009041020A: Polyhydroxy Compounds as Polymerization Quenching Agents
[16] 陈忠仁,侯琳熙,孙巍,历伟, CN103044626B:一种超级吸油橡胶材料及其制备方法
[17] 陈忠仁,历伟,侯琳熙,穆景山, CN103059186B:一种乙烯嵌段共聚物的制备方法
[18]陈忠仁,历伟,侯琳熙,穆景山, CN103193907B:一种制备超高分子量聚乙烯复合材料的方法
[19]陈忠仁 历伟 侯琳熙, CN103193908B:一种制备超强UHMWPE纤维的方法及其相关催化剂
[20]陈忠仁,包锦标,刘智峰,张秀屏, CN104277237A:一种聚合物发泡材料的制备方法
[21]陈忠仁,包锦标,刘智峰,黄通荣, CN104277233A:一种提高聚丙烯材料耐热性能的方法
[22]陈忠仁,李微微,李春阳,徐文静, CN104278510A:一种超高分子量聚乙烯纤维复合表面改性方法
[23]陈忠仁,李微微,李春阳,徐文静, CN104278511A:一种超高分子量聚乙烯纤维复合表面改性方法
[24]陈忠仁,包锦标,刘智峰, CN104275766A:一种模压发泡过程中超临界流体的捕集及循环利用装置
[25]陈忠仁,包锦标,刘智峰, CN104275766A:一种模压发泡过程中超临界流体的捕集及循环利用装置
[26]陈忠仁,包锦标,刘智峰, CN203472039U,一种超临界流体输送装置
[27]陈忠仁,包锦标,刘智峰, CN104275767A,一种超临界流体输送装置
[28]陈忠仁,翁更生,刘衍朋, CN203449526U,超高分子量聚乙烯纤维橡胶复合材料及其制备方法
[29]陈忠仁,翁更生,刘衍朋, CN104292528A,一种高强度橡胶及其制备方法
[30]陈忠仁,翁更生,刘衍朋, CN104290223A,一种平板硫化机的施加剪切装置
[31] 陈忠仁,翁更生,刘衍朋, CN203472017U,一种平板硫化机的施加剪切装置
[32] 陈忠仁,翁更生,刘衍朋, CN104774359A,一种聚合物/碳纳米管复合材料的制备方法
[33] 陈忠仁,穆景山,杨飞, CN105017516A,一种聚乙烯基超支化聚合物的制备方法
[34] 陈忠仁,阮一平,毕文超, CN105585745A,一种橡胶发泡吸油材料及其制备方法
[35] 陈忠仁,贺登峰,关超,徐杰,阮一平,毕文超, CN105199214A,一种聚乙烯共混材料的制备方法
[36] 陈忠仁,马少华,闫智敬,付坤,毕文超, CN205044002U,一种带可活动人工割胶装置的开炼机
[37] 陈忠仁,包锦标,刘智峰,应建行,毕文超,阮一平, CN105218851A,一种制备聚合物开孔发泡材料的方法
[38] 陈忠仁,闫智敬,马少华,毕文超,付坤, CN205044001U,一种开炼机用人工割胶刀
[39] 闫智敬,陈忠仁,马少华,毕文超,付坤, CN205044006U,一种开炼机用人工割胶刀架
[40] 闫智敬,陈忠仁,马少华,阮一平,付坤, CN205044003U,一种开炼机用人工割胶机构
[41] 马少华,陈忠仁,付坤,闫智敬,阮一平, CN205044005U,一种数码控制辊筒距离的开炼机
[42]马少华,陈忠仁,闫智敬,阮一平,付坤, CN205044000U,一种遇险紧急自动停车防轧伤的开炼机
[43]陈忠仁,马少华,闫智敬,阮一平, CN105671932A,用于去除芳纶表面上浆剂的方法、浸泡液及淋洗液
[44] 陈忠仁,马少华,闫智敬,毕文超, CN105568672A,芳纶表面改性方法
[45] 陈忠仁，余锋，CN201710234034.0，FI负载催化剂及其制备方法和应用