Publications

  • Journal Papers
  1. C Xiong, Z Wang, X Peng, Y Guo, S Xu, TS Zhao, Bifunctional Effect of Laser-Induced Nucleation-Preferable Microchannels and in-situ formed LiF SEI in MXene for Stable Lithium-Metal Batteries, Journal of Materials Chemistry A, 2020, JCR (Q1)
  2. Q Gong, P Qiu, S Xu*, Evolution of chip-deformation mechanisms with increasing temperature in laser-assisted microcutting of amorphous alloy, International Journal of Automation Technology, 14(4), 568-574, 2020, EI.
  3. J Zheng, J Huang, S Xu*, Multiscale micro-/nanostructures on single crystalline SiC fabricated by hybridly polarized femtosecond laser, Optics and Lasers in Engineering 127, 105940, 2020, JCR (Q1)
  4. B Meng, D Yuan, J Zheng, P Qiu, S Xu*, Tip-based nanomanufacturing process of single crystal SiC: Ductile deformation mechanism and process optimization, Applied Surface Science 500, 144039, 2020, JCR (Q1)
  5. B Meng, D Yuan, S Xu*, Atomic-Scale Characterization of Slip Deformation and Nanometric Machinability of Single-Crystal 6H-SiC, Nanoscale research letters 14 (1), 309, 2019, JCR (Q2)
  6. B Meng, P Qiu, D Yuan, S Xu*, Influence of microstructure on the diamond-machinability of hot-pressed silicon carbide: A molecular dynamics study, Ceramics International 45 (17), 22872-22879, 2019, JCR (Q1)
  7. B Meng, D Yuan, J Zheng, S Xu*, Molecular dynamics study on femtosecond laser aided machining of monocrystalline silicon carbide, Materials Science in Semiconductor Processing, 101, 1-9, 2019, JCR (Q2)
  8. H Tang, P Qiu, R Cao, J Zhuang, S Xu*, Repulsive magnetic field–assisted laser-induced plasma micromachining for high-quality microfabrication, The International Journal of Advanced Manufacturing Technology 102, (5-8), 2223-2229, 2019, JCR (Q2)
  9. B Meng, D Yuan, S Xu*, Study on strain rate and heat effect on the removal mechanism of SiC during nano-scratching process by molecular dynamics simulation, International Journal of Mechanical Sciences 151, 724-732, 2019, JCR (Q1)
  10. B Meng, D Yuan, S Xu*, Coupling effect on the removal mechanism and surface/subsurface characteristics of SiC during grinding process at the nanoscale, Ceramics International 45 (2), 2483-2491, 2019, JCR (Q1)
  11. B Meng, J Zheng, D Yuan, S Xu*, Machinability improvement of silicon carbide via femtosecond laser surface modification method, Applied Physics A, 125 (1), 69, 2019, JCR (Q3)
  12. Yue Sun, Keita Shimada, Shaolin Xu, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Friction reduction by micro-textured surfaces in lubrication, Int. J. of Automation Technology, 12 (4), 2018, 603-610.
  13. Yue Sun, Shaolin Xu, Tomoki Kyoizumi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, CFD Analysis of Friction-Reduction Effect of Micro-Textured Surfaces in Lubricant, Int. J. of Automation Technology, 12 (2), 2018, 206-214.
  14. Ryuichi Kobayashi, Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Defining the effects of cutting parameters on burr formation and minimization in ultra-precision grooving of amorphous alloy, Precis Eng, 49, 2017, 115–121.
  15. Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Development of a novel 2D rotary ultrasonic texturing technique for fabricating tailored structures, Int J Adv Manuf Tech, 89 (1), 2017, 1161-1172.
  16. Shaolin Xu, Tsunemoto Kuriyagawa, Keita Shimada, Masayoshi Mizutani, Recent advances in ultrasonic assisted machining for fabrication of micro/nano-textured surfaces, Front Mech Eng, 12(1), 2017, 33-45.
  17. Jingsi Wang, Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Smoothed particle hydrodynamics simulation and experimental study of ultrasonic machining, Proc IMechE Part B: J Engineering Manufacture, 2017 (1) :095440541769200.
  18. Shaolin Xu, Shinsaku Osawa, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Minimizing burrs and defects on microstructures with laser assisted micromachining technology, Int J Autom Tech, 10 (6), 2016, 891-898.
  19. Masayoshi Mizutani, Jun Komotori, Tohru Hayakawa, Shaolin Xu, Keita Shimada, Tsunemoto Kuriyagawa, High functionalization of dental implant with laser fabrication, Journal of the Japan Society for Precision Engineering, 81 (12), 2015, 1073-1077.
  20. Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Analysis of machinable structures and their wettability of rotary ultrasonic texturing method, Chin J Mech Eng, 29 (6), 2016, 1187-1192.
  21. Shaolin Xu, Ketia Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Fabrication of hybrid micro/nano-textured surfaces using rotary ultrasonic machining with one-point diamond tool, Int J Mach Tool Manu, 86, 2014, 12-17.
  22. Shaolin Xu, Chihiro Nishikawa, Ketia Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Surface textures fabrication on zirconia ceramics by 3D ultrasonic vibration assisted slant feed grinding, Advanced Materials Research, 797, 2013, 326-331.

Copyright © 2018 All Rights Reserved.